All maximum load limits stated for our roof bars refer to dynamic loading — the weight that can be carried while the vehicle is moving.
Dynamic Loading Limits
Before loading your roof bars, you must check two limits:
- Roof bar load limit: Check the instructions supplied with your particular roof bar system to confirm its maximum dynamic loading capacity.
- Vehicle roof load limit: Check your vehicle handbook or contact your local dealer to find out the maximum permitted roof load.
Always follow the lower of these two limits. The total load must remain within the limits specified by both the vehicle and roof bar manufacturers.
Static Loading Limits
Static loading refers to the weight that can be supported when the vehicle is stationary, for example, when using a roof-top tent.
Static load capacity is typically around three times the dynamic load limit, but this is only a general guide and must not be assumed to apply to every vehicle or roof bar system. We recommend confirming the permitted static load with your vehicle manufacturer and checking the roof bar manufacturer's guidance before fitting a roof-top tent.
Important: Roof Bars Suitable for Roof-Top Tents
Roof-top tents should only be fitted to suitable roof bar systems installed on vehicles with:
- Raised roof rails.
- Flush-mounted roof rails.
- Fixed mounting points.
- T-track channels.
Roof-top tents are not suitable for plain-roof vehicles, where the roof bars clamp around the vehicle's bodywork or door frames.
Always check the compatibility and loading requirements of your vehicle, roof bars and roof-top tent before installation.